usa 858 674 8100 ? germany 49 7032 7806 0 ? singapore 65 6287 8998 ? shanghai 86 21 54643211 / 2 ? china 86 755 33966678 ? taiwan 886 3 4643715 www.pulseeng.com p683.a (5/09) smt power inductors unshielded drum core C pg0016nl series current rating: up to 8.5a inductance range: 0.33h to 220h height: 4.85 mm max footprint: 6.0mm x 5.4mm max electrical specifications @ 25c operating temperature - 40c to +130c 6 mechanical schematic dimensions: inches mm unless otherwise specified, all tolerances are .004 0,10 weight .......... 0.46 grams tape & reel .... 1400pcs/reel .191 4.85 max .236 6.0 .005 (1) (2) ? max .213 5.4 max da te code xxxnl suggested pcb la y out 5.8 .228 .039 typ 1.00 .24 typ typ 6.1 part 5 number inductance @irated 1 ( h typ) irated 2 (a) dcr ( m w ) inductance @ 0adc (h 15%) saturation current 3 isat (a typ) heating current 4 idc (a typ) pg0016.331nl 0.29 8.5 4.3 0.33 13 8.5 pg0016.561nl 0.48 6.6 6.5 0.56 10 6.6 pg0016.681nl 0.68 6.0 7.0 0.68 8.0 6.0 pg0016.821nl 0.71 6.0 11 0.82 7.8 6.0 pg0016.102nl 1.0 4.5 13 1.0 6.8 4.5 pg0016.152nl 1.3 4.0 16 1.5 6.1 4.0 pg0016.222nl 2.1 3.2 23 2.2 5.0 3.2 pg0016.272nl 2.7 2.9 25 2.7 4.2 2.9 pg0016.332nl 3.1 2.6 30 3.3 4.0 2.6 pg0016.472nl 4.2 2.3 34 4.7 3.3 2.3 pg0016.682nl 6.1 1.8 55 6.8 2.9 1.8 pg0016.822nl 7.4 1.7 60 8.2 2.6 1.7 pg0016.103nl 10 1.5 80 10 2.3 1.5 pg0016.123nl 12 1.4 120 12 2.1 1.4 pg0016.153nl 14 1.3 140 15 1.8 1.3 pg0016.183nl 18 1.2 150 18 1.6 1.2 pg0016.223nl 21 1.1 180 22 1.6 1.1 pg0016.273nl 27 0.97 200 27 1.4 0.97 pg0016.333nl 33 0.88 230 33 1.3 0.88 pg0016.393nl 39 0.80 320 39 1.1 0.80 pg0016.473nl 46 0.72 370 47 1.0 0.72 pg0016.563nl 56 0.68 420 56 0.95 0.68 pg0016.683nl 68 0.61 530 68 0.80 0.61 pg0016.823nl 82 0.58 600 82 0.70 0.58 pg0016.104nl 100 0.52 840 100 0.70 0.52 pg0016.124nl 120 0.48 930 120 0.60 0.48 pg0016.154nl 150 0.40 1250 150 0.55 0.40 pg0016.184nl 180 0.38 1400 180 0.50 0.38 pg0016.224nl 217 0.35 1600 220 0.50 0.35
smt power inductors unshielded drum core C pg0016nl series www.pulseeng.com p683.a (5/09) for more information: pulse worldwide headquarters 12220 world trade dr. san diego, ca 92128 u.s.a. www.pulseeng.co m tel: 858 674 8100 fax: 858 674 8262 pulse south asia 135 joo seng rd. #03-02 pm industrial bldg. singapore 368363 tel: 65 6287 8998 fax: 65 6280 0080 pulse north asia no. 26, kao ching rd. yang mei chen taoyuan hsien taiwan r. o. c. tel: 886 3 4643715 fax: 886 3 4641911 pulse north china room 1503 xinyin building no. 888 yishan rd. shanghai 200233 china tel: 86 21 54643211/2 fax: 86 21 54643210 pulse europe einsteinstrasse 1 d-71083 herrenberg germany tel: 49 7032 7806 0 fax: 49 7032 7806 135 performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change without notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2009. pulse engineering, inc. all rights reserved. pulse china headquarters b402, shenzhen academy of aerospace technology bldg. 10th kejinan rd. high-tech zone nanshan district shenzen, pr china 518057 tel: 86 755 33966678 fax: 86 755 33966700 notes: 1. inductance at irated is a typical inductance value for the component taken at rated current. 2. the rated current listed is the lower of the saturation current @ 25 c or the heating current. 3. the saturation current, isat, is the current at which the component inductance drops by 10% (typ.) at an ambient temperature of 25 c. this current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 4. the heating current, idc, is the dc current reqired to raise the compo - nent temperature by approximately 40 c. the heating current is deter - mined by mounting the component on a typical pcb and applying current for 30 minutes. 5. optional tape & reel packaging can be ordered by adding a t suffix to the part number (i.e. pg0016.331nl becomes pg0016.331nlt). pulse complies to industry standard tape and reel specification eia481. 6. the temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 50 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 60 70 80 90 100 110 t ypical inductance vs. curr ent characteristics p ercentage of the initial inductance nor maliz ed isat
|
